Self loading concrete mixer truck 4x2 6x4 8x4 5 to 18 cubic meters for Africa AIA-1 manufacturer from China sinotruk kogel special truck company limited

Self loading concrete mixer truck 4x2 6x4 8x4 5 to 18 cubic meters for Africa

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: AIA-1

Self loading concrete mixer truck 4x2 6x4 8x4 5 to 18 cubic meters for Africa

Specifications:</st

Self loading concrete mixer truck 4x2 6x4 8x4 5 to 18 cubic meters for Africa

Specifications:

Vehicle Specifications	Model		concrete mixer truck for sale
	Traction 4X2,6X4,8X4		8X4
	Power		336HP
Weight Parameter	Complete Vehicle Kerb Mass(kg)		15120
	Maximum authorized total mass (kg)		31000
Dimension Parameter	External Dimensions(mm)	Length (mm)	10745
		Width(mm)	2496
		Height(mm)	3190
	wheelbase(mm)		1800+3800+1350
	Drum Volumetric		14 cubic
	Drum Thickness(mm)		6
Performance Parameter	Maximum Speed(km/h)		75
	Turning diameter(m)		16
Recommended Configuration	Engine	Engine Type	WD615.69
		Rated power (kW)/Rev(r/min)	247/2200
	Transmission	Manual operation, 10 forward & 2reverse with no synchronizer
	Axle	Front Axle Payload(kg)
		Rear Axle Payload(kg)
	Fuel Tank(L)
	Track(mm)
	Front overhang/rear overhang(mm)
	Tire
Cabin	Standard cab with One sleeper, with 4-point support fully floating suspension and shock absorbers, with air conditioner
OTHER	ABS
	COLOR

Notes for New Vehicle Run-in
1. The run-in distance is set to be 2500 km. Before running in, conduct a routine check of the concrete mixer truck to ensure that the vehicle is in normal working condition.
2. After starting the engine, do not accelerate immediately. Wait for 3 to 5 minutes. After the normal operating temperature is reached, you can increase the engine speed.
3. It is strictly prohibited to shut down the engine in the state of warming car. You have to wait for 3 to 5 minutes before shutdown.
4. During the run-in period, the vehicle should run on flat roads.
5. You should shift the gears timely. Smoothly engage the clutch. Avoid sudden acceleration and emergency braking.
6. Before going up the slope, shift into the low speed level. But note that do not let the engine work at very low speeds.
7. In the first 3000km driving distance of the new vehicle, the vehicle load should not exceed 70% of the rated load. The lubrication and maintenance cycle should be shortened in the break-in period.